Monitoring tool wear process in turning machine using acoustic emission technique
This project have been conducted in an attempt to monitor the changing of tool wear caused by increasing the cutting speed, through the variation of acoustic emission in turning process, under different feed and depth of cut. The signal-processing analysis was done on the raw signal, on the Acoustic...
Internet
http://umpir.ump.edu.my/id/eprint/1511/http://umpir.ump.edu.my/id/eprint/1511/
http://umpir.ump.edu.my/id/eprint/1511/1/Monitoring%20tool%20wear%20process%20in%20turning%20machine%20using%20acoustic%20emission%20technique%20-%20Table%20of%20content.pdf
http://umpir.ump.edu.my/id/eprint/1511/2/Monitoring%20tool%20wear%20process%20in%20turning%20machine%20using%20acoustic%20emission%20technique%20-%20Abstract.pdf
http://umpir.ump.edu.my/id/eprint/1511/13/Monitoring%20tool%20wear%20process%20in%20turning%20machine%20using%20acoustic%20emission%20technique%20-%20Chapter%201.pdf
http://umpir.ump.edu.my/id/eprint/1511/14/Monitoring%20tool%20wear%20process%20in%20turning%20machine%20using%20acoustic%20emission%20technique%20-%20References.pdf