Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder
Powder metallurgy (processing) method was used to produce an insert for machining application. An alumina (Al2O3) powder reinforced with Copper power was used as a raw material. A complete die was produced for the insert production. Powder mixing, compaction and sintering using open air furnace were...
| id |
ump-16307 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-163072017-01-24T03:49:04Z http://umpir.ump.edu.my/id/eprint/16307/ Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder Muhammad Aiman, Ishak Q Science (General) TS Manufactures Powder metallurgy (processing) method was used to produce an insert for machining application. An alumina (Al2O3) powder reinforced with Copper power was used as a raw material. A complete die was produced for the insert production. Powder mixing, compaction and sintering using open air furnace were the main processing parameters in the research project. The composite insert was analyzed for density and hardness properties. The result showed that 90% of the theoretical density was achieved and 70% by weight mixed with 30% copper was measured for the higher Vickers hardness value. 2016-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/16307/1/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-Table%20of%20contents-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/16307/7/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-Abstract-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/16307/8/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-Chapter%201-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/16307/9/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-References-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf Muhammad Aiman, Ishak (2016) Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:98440&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English English English English |
| topic |
Q Science (General) TS Manufactures |
| spellingShingle |
Q Science (General) TS Manufactures Muhammad Aiman, Ishak Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder |
| description |
Powder metallurgy (processing) method was used to produce an insert for machining application. An alumina (Al2O3) powder reinforced with Copper power was used as a raw material. A complete die was produced for the insert production. Powder mixing, compaction and sintering using open air furnace were the main processing parameters in the research project. The composite insert was analyzed for density and hardness properties. The result showed that 90% of the theoretical density was achieved and 70% by weight mixed with 30% copper was measured for the higher Vickers hardness value. |
| format |
Undergraduates Project Papers |
| author |
Muhammad Aiman, Ishak |
| author_facet |
Muhammad Aiman, Ishak |
| author_sort |
Muhammad Aiman, Ishak |
| title |
Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder |
| title_short |
Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder |
| title_full |
Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder |
| title_fullStr |
Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder |
| title_full_unstemmed |
Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder |
| title_sort |
development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder |
| publishDate |
2016 |
| url |
http://umpir.ump.edu.my/id/eprint/16307/ http://umpir.ump.edu.my/id/eprint/16307/ http://umpir.ump.edu.my/id/eprint/16307/1/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-Table%20of%20contents-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf http://umpir.ump.edu.my/id/eprint/16307/7/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-Abstract-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf http://umpir.ump.edu.my/id/eprint/16307/8/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-Chapter%201-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf http://umpir.ump.edu.my/id/eprint/16307/9/Development%20of%20ceramics%20cutting%20tool%20for%20machining%20using%20aluminium%20oxide%20reinforced%20with%20copper%20powder-References-FKP-Muhammad%20Aiman%20Ishak-CD%2010444.pdf |
| first_indexed |
2023-09-18T22:21:50Z |
| last_indexed |
2023-09-18T22:21:50Z |
| _version_ |
1777415708759556096 |