Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis

Piping system is one of the important features in either home of industrial user. It is essential for transporting fluid from a point to another point. For example, for home user, piping systems functioning as carrier for the water from the damp to every home. Whereas, for industrial user, the fluid...

Full description

Bibliographic Details
Main Authors:	Makeen, Mohd Amin, Mohd Fairusham, Ghazali, Abdul, malik, Nurul Fatiehah, Adnan
Format:	Article
Language:	English
Published:	AENSI Journals 2014
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/19814/ http://umpir.ump.edu.my/id/eprint/19814/ http://umpir.ump.edu.my/id/eprint/19814/1/AJBAS_2014_352-355_makeen.pdf

id	ump-19814
recordtype	eprints
spelling	ump-198142018-02-12T06:42:55Z http://umpir.ump.edu.my/id/eprint/19814/ Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis Makeen, Mohd Amin Mohd Fairusham, Ghazali Abdul, malik Nurul Fatiehah, Adnan TJ Mechanical engineering and machinery Piping system is one of the important features in either home of industrial user. It is essential for transporting fluid from a point to another point. For example, for home user, piping systems functioning as carrier for the water from the damp to every home. Whereas, for industrial user, the fluid that is carried are from different type such as water, gas, oil and many more. But due to many reasons, leaks may occur in the pipelines. This paper is focusing on the leakage detection in the pipelines using wavelet on cepstrum analysis. The basic principle is the fact that water spouting out of a leak in a pressurized pipe generates signal, and this signal contains information to whether a leak exists and where it is located. The present transient methods for finding leaks are mainly based upon correlation analysis, where one sensing device is installed at each side of a leak. This method is hard to operate because it needs a lot of operators to operate it due to equipment in different place. To overcome this limitation a pressure transducer is used as the sensing device and ceptrum analysis to show the data obtained. AENSI Journals 2014 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/19814/1/AJBAS_2014_352-355_makeen.pdf Makeen, Mohd Amin and Mohd Fairusham, Ghazali and Abdul, malik and Nurul Fatiehah, Adnan (2014) Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 352-355. ISSN 1991-8178(print); 2309-8414(online) http://www.ajbasweb.com/old/ajbas/2014/Special%2010/352-355.pdf
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Makeen, Mohd Amin Mohd Fairusham, Ghazali Abdul, malik Nurul Fatiehah, Adnan Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis
description	Piping system is one of the important features in either home of industrial user. It is essential for transporting fluid from a point to another point. For example, for home user, piping systems functioning as carrier for the water from the damp to every home. Whereas, for industrial user, the fluid that is carried are from different type such as water, gas, oil and many more. But due to many reasons, leaks may occur in the pipelines. This paper is focusing on the leakage detection in the pipelines using wavelet on cepstrum analysis. The basic principle is the fact that water spouting out of a leak in a pressurized pipe generates signal, and this signal contains information to whether a leak exists and where it is located. The present transient methods for finding leaks are mainly based upon correlation analysis, where one sensing device is installed at each side of a leak. This method is hard to operate because it needs a lot of operators to operate it due to equipment in different place. To overcome this limitation a pressure transducer is used as the sensing device and ceptrum analysis to show the data obtained.
format	Article
author	Makeen, Mohd Amin Mohd Fairusham, Ghazali Abdul, malik Nurul Fatiehah, Adnan
author_facet	Makeen, Mohd Amin Mohd Fairusham, Ghazali Abdul, malik Nurul Fatiehah, Adnan
author_sort	Makeen, Mohd Amin
title	Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis
title_short	Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis
title_full	Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis
title_fullStr	Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis
title_full_unstemmed	Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis
title_sort	leak detection in pipeline using wavelet and ceptrum analysis
publisher	AENSI Journals
publishDate	2014
url	http://umpir.ump.edu.my/id/eprint/19814/ http://umpir.ump.edu.my/id/eprint/19814/ http://umpir.ump.edu.my/id/eprint/19814/1/AJBAS_2014_352-355_makeen.pdf
first_indexed	2023-09-18T22:28:25Z
last_indexed	2023-09-18T22:28:25Z
_version_	1777416122282278912

Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis

Similar Items